How to Clean Jeep Free Light Throttle

How long the throttle will be dirty depends on the quality of the air filter, the brand and quality of the engine oil, the condition of the driving section, the temperature, the working temperature of the engine, driving habits and so on. Even for individuals, it is impossible to determine the time to clean the throttle with a fixed number of kilometers. The interval between cleaning the throttle for the first time in a new car is the longest. Later, due to the continuous condensation of oil and gas in the crankcase ventilation pipe and intake port, the cleaning frequency will increase, and different weather conditions will also affect the dirty speed of the throttle.

1. Remove air cleaner assembly.

2. Remove the throttle cable (mechanical cable throttle). First, screw the throttle control mechanism to the maximum position, pull it with the left hand, hold the throttle cable with the right hand, and take it out from the gap of the control mechanism. Then remove the cable from the accelerator cable bracket, take off the limit clamp and gasket and put them in a safe place. Finally, remove the accelerator cable bracket fixed on the throttle body.

3. Loosen the three fastening bolts on the throttle body with a suitable wrench and remove the throttle body.

4. Remove the sealing skirt at the joint of the throttle body and the air cleaner to prevent the cleaning agent from corroding the skirt and causing the skirt to expand and break. After removing the sealing apron, check for signs of aging and cracks.

5. Clean the throttle body.