How to disassemble and assemble the electronic throttle

It is suggested that the disassembly and assembly of the electronic throttle should be carried out in the garage. There are two kinds of throttle: traditional wire-controlled throttle and electronic throttle. The traditional engine throttle control mechanism works through steel wire (soft steel wire) or joystick, one end of which is connected with the throttle pedal and the other end is connected with the throttle linkage plate. The electronic throttle mainly controls the opening of the throttle and adjusts the air intake through the throttle position sensor according to the energy required by the engine. If you need to remove the electronic throttle, you can follow the following steps: 1, turn off the ignition switch to the "off" position; 2. Unplug the electronic throttle body connector; 3. Remove the air inlet connected with the electronic throttle body; 4. Remove the fastening bolts of electronic throttle body and intake manifold, and check whether the gasket (ring) is intact; 5. Finally, remove the electronic throttle body for maintenance or replacement. When disassembling, avoid unnecessary damage and misoperation. It is recommended to disassemble it in a professional auto repair shop.