How to open the engine cover of Lingke 0 1 (how to close the engine cover of Lingke 0 1)

Klin 0 1 Method of opening the engine compartment lid: Before opening the engine compartment lid, make sure to eliminate all interference from opening the engine compartment lid. Step: 1. Press the hood opening handle under the dashboard on the driver's side twice. 2. Lift the engine compartment cover. 3. Remove the left middle decorative cover 1. 4. Remove the magnifying rivet with a suitable tool. 5. Loosen the fasteners of the decorative cover. 6. Remove the decorative cover. When installing the hood, please install it in the reverse order. After installing the engine compartment cover, please confirm whether the installation is firm. Link 0 1 How to close the engine room cover: Steps: 1. Put down the hood. 2. Cover the engine room until it is locked. Before driving, please ensure that the engine compartment cover is completely closed and locked. Otherwise, the engine compartment cover will suddenly open, leading to an accident. Before closing the hood, please make sure that there are no obstacles at the opening of the hood, and there are no gloves, rags or other combustible materials in the hood. Otherwise, it will cause fire or personal injury. Operational considerations: 1. Vehicle maintenance requires professional skills. If there is no professional knowledge, experience and suitable tools and equipment, it is recommended to send the vehicle to LynkCo bottleneck center. 2. Before performing any operation in the engine compartment, the ignition switch must be turned off (put the ignition switch in the 0 position). Failure to comply with this requirement may result in personal injury. 3. Remove all accessories, especially earrings, bracelets, watches and necklaces, and avoid hands and clothes touching the drive belt, pulleys and fans. The fan can work at any time, even when the engine is stopped. Failure to comply with this requirement may result in personal injury.