How to remove the Cadillac xt5 throttle?

Disassembly method of Cadillac xt5 throttle: firstly, use 10mm sleeve to remove the engine guard, and then use 10mm sleeve to remove the engine guard; Remove the air inlet plastic pipe; Then remove the pipe from the intake hose and loosen the screw near the throttle clamp with an 8mm sleeve; Then loosen the screw at the other end and remove the air inlet hose between the air filter and the throttle; Remove the hose of the carbon charging solenoid valve, and clamp it with pliers to remove it.

The throttle valve is an important part of the vehicle, which is located between the air cleaner and the intake manifold. It is a controllable valve to control air to enter the engine, which needs to be cleaned regularly, otherwise it is prone to adverse reactions such as unstable idle speed. There is no strict limit on the frequency of cleaning the throttle, which has a lot to do with car habits and environment. Clean it when it is dirty, usually around 20 thousand kilometers.

When cleaning the throttle, be careful that it is dirty when it is completely removed. At this time, do not unplug the connecting plug of the throttle. During the whole cleaning process, you should keep close contact between the connecting line and the throttle valve. It is best to use carburetor cleaner when cleaning. Carburetor cleaning agent is corrosive to some extent, so it is best to prepare a pair of gloves to avoid corroding the skin when cleaning yourself.