How to adjust the filter of air pump and air compressor

The air pump air compressor filter needs to be adjusted by the pressure regulating valve handle.

There is a pressure regulating valve handle at the upper end of the filter pressure reducing valve. Generally, it is necessary to pressurize clockwise or decompress counterclockwise after pulling up. After adjusting to the required pressure, it will press down to a fixed position, thus fixing the pressure. Generally, pressure reducing valves are designed to avoid pressure changes caused by operations in production.

All pressure reducing valves have two outlets designed to be perpendicular to the input and output ends, that is, the installation position of the pressure gauge of the pressure reducing valve, which can be used by installing the corresponding pressure gauge according to the caliber.

Direct-acting safety valve and pilot-operated safety valve. The function of the pressure reducing valve is to stably adjust the pressure of the compressed air source entering the pneumatic system, so as to keep the pressure of the pneumatic working system stable. Excessive impurities in the filter cavity will affect the fluidity of the medium and need to be cleaned.

The filter is used to clean the gas source, which can filter the moisture in the compressed air and prevent the moisture from entering the equipment with the gas. The pressure reducing valve can stabilize the air source, keep the air source in a constant state, and reduce the damage to hardware such as valves or actuators when the air pressure of the air source suddenly changes.