Twisted roses

Materials: 9 twisted stick, Hua Gun (bamboo stick can also be used instead), hot melt adhesive (glue usually used, hand-made alcohol glue can also be used, that is, press more, and then paste the next piece when it is dry and fixed).

Steps:

1. Prepare 9 torsion bars first, take out 3 torsion bars and cut them in half (as the outer layer of petals), and take out the remaining 6 torsion bars and cut them into three sections (fold them back and forth as long as possible, and the error should not be too big, after all, we are not machines, so we are not so accurate). 1.5 is shorter than 3.

2. Next, start making petals. The first short torsion bar is wound and fixed at one-third position, and the other two are wound in turn, so that the whole is in the middle position. Then fold the torsion bars on both sides, tidy them up, pinch the bottom of all torsion bars, find the longest one, and fix all torsion bars together with this long one like a rope.

3. When the petals are finished, they should be concave. First, gently bend the petals with your fingertips and fold them up and down (don't fold too much at the top, just fold the tips, the bottom fold is our fixed position, and there will be obvious small roots).

4, start assembly, assembly is actually very simple, that is, one piece presses the other piece, the first piece is bonded, and then the left side of the second piece presses the right side of the first piece, and so on. When sticking, you can tighten the petals inward, or you can pull them one by one to look as full as possible.

Because there is still a fixed position to beautify, so take a green twist stick and start winding it along the part we want to hide, that is, the bottom of the petal. After the whole package is completed, the beautified part becomes a container. Here, the rose is finished.