/kloc-how to clean the throttle of 0/6 yinglang?

The standard method for cleaning the throttle valve of Pacific Auto Network is to remove the throttle valve, pull the throttle valve fully open by hand, spray the throttle cleaning agent on cotton cloth, and wipe the dirty part of the throttle valve until it is clean. Buick Hideo's throttle is generally cleaned once every 30,000-40,000 kilometers, depending on the driving situation and driving mode of the vehicle.

The electronic throttle has a position sensor for sensing the opening of the throttle.

The data is transmitted to the computer. Before cleaning, the opening of the throttle baffle has been adjusted by the computer, the opening data has been memorized in the computer, and the opening of the next car has been defaulted.

When we clean up carbon deposits and impurities, the gap between baffles becomes larger, the air intake at idle speed increases, the engine speed increases, the idle speed is high, and the car shakes.

We need computer matching to initialize the throttle computer data and adapt the baffle to the new environment.

However, there are also a few electronic throttles that do not need additional computer matching after cleaning. There will be a learning process after the throttle computer is cleaned, which is also a self-correcting ability, and the baffle will adapt itself to the new intake environment.

Buick Hideo, the new car doesn't run much, but it's always filled with gasoline from a small gas station. There is no habit of hot car during use, which leads to carbon and scale accumulation in the intake and combustion chamber, idling jitter and weak acceleration when driving, and the new car that was originally smooth to drive becomes difficult to drive.