How to match the tenth generation Civic waste gas valve?

Turn on the ignition and don't start the engine.

2. Connect X-43 1 decoder and select popular diagnostic software.

3. Enter "Engine System", select "System Basic Adjustment" function and enter the adjustment group number: 098, 060 or 00 1. Common vehicle channel numbers: 00 1, Xiaoqingqi 488, Passat B4, Audi (100,200, V6 and other old models) 098 Santana GSI, V6. V6)060 Jetta Pioneer (2 valves), A6( 1.8, 1.8T, 2.4, 2.8), Passat B5( 1.8T, 2.8), Bora, POLO.

4. Press the "OK" key to enter the setting process, and the throttle controller passes through the minimum to maximum point and the middle five positions. The control unit stores the corresponding throttle angle in the memory, which takes about 10 seconds, and then the throttle is in the initial position for a short time, and then closed.

5. When the words "Adaptive Completion" are displayed on the last line of the screen, the basic settings are completed. Press the "Exit" key to complete the setting, turn off the ignition key, turn it on again, start the engine, and verify the matching effect.