How to match Nissan's cleaning throttle

1, keep the ignition off and turn the ignition switch to the on position.

2. Wait for 3 seconds, then quickly and completely press and release the accelerator pedal for 5 times within 5 seconds. Wait for 7 seconds, don't touch anything, and then press the accelerator pedal completely.

3. Step on the gas pedal and keep it. Observe the engine fault light on the instrument, it will flash after about 10 seconds, and it will stay on after flashing. Release the accelerator pedal. Matching is complete.

Extended data:

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, and the combustion is successful. It connects the air filter and the engine block, and is called the throat of the automobile engine.

Throttle four-stroke gasoline engines are generally like this. Throttle is one of the most important components in EFI automobile engine system. Its upper part is the air cleaner grille, and the lower part is the engine body, which is the throat of the automobile engine. Whether the acceleration of a car is flexible or not has a lot to do with the dirt of the throttle. Cleaning the throttle can reduce fuel consumption and make the engine flexible and powerful.

How to clean and prevent should pay attention to:

1, which should be dismantled and cleaned;

2. Correct some mistakes in cleaning the throttle valve;

3. The fouling of the throttle is mainly engine oil vapor, followed by particles and moisture in the air. That is to say, using a qualified air filter and removing the crankcase ventilation pipe, the fouling speed of the throttle will be much slower.

The crankshaft is built in the crankcase, and the lower part is connected with the oil bottom. The working temperature of this part is about 100 ~ 180.

Baidu encyclopedia-throttling