How to adjust the idle speed of Baojun 3 10?

How to adjust the idle speed of Baojun 3 10? How to adjust the idle speed of Baojun 3 10? Baojun 3 10 idle speed normally fluctuates between 700 and 800 rpm. The following is the introduction of Baojun 3 10 idle speed: 1. Idle speed adjustment: Baojun 3 10 adjusts the idle speed under normal conditions such as normal engine temperature, proper valve clearance, normal ignition system, good pipeline sealing, full throttle opening and tight throttle closing. 2. Adjustment step: firstly, loosen the throttle opening adjustment screw to make the engine reach the lowest stable speed. Then screw in the idle speed adjusting screw with a screwdriver, and then slowly unscrew the idle speed adjusting screw when the engine is about to stall, so that the engine can run smoothly and reach a high speed. Then loosen the throttle opening adjustment screw to make the engine speed as low as possible. Then adjust the idle adjustment screw to increase the engine speed. Repeat this process until the throttle opening is minimum and the engine runs at the lowest stable speed. Finally, increase the speed and suddenly close the throttle, so that the engine can still turn without stalling. @20 19