Roewe 950 throttle self-study steps

Operating steps 1. Make sure that the accelerator pedal is completely released. 2. Turn the ignition switch to the on position. 3. Turn the ignition switch to the off position and wait at least 10 second. At this time, it is confirmed that the throttle action exceeds 10 second through the action sound of the throttle. 3. Start the engine and preheat it to normal working temperature. 4. Check and confirm that the water temperature is normal. 5. Turn off the ignition switch and wait at least 10 second. 6. Ensure that the accelerator pedal is completely released, turn the ignition switch to the on position and wait for 3 seconds. 7. Quickly repeat the following operations five times in five seconds. Fully depress the accelerator pedal. Loosen the accelerator pedal completely. 8. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up. 9. Fully release the accelerator pedal within 3 seconds after the 9.MIL light is turned on. 10. Start the engine and let it idle for a period of time.