Standard for air source pipe of pneumatic valve

The standard of pneumatic valve gas source pipe is that the standard gas source pressure of pneumatic valve is 4 to 7bar, and a good gas source pressure must be stable at 5 to 6bar. Especially for single-acting pneumatic valves, if it is lower than 5bar, the valve may not open. When multiple pneumatic valves are used at the same time, the air compressor must have enough capacity to ensure that the pneumatic valves can be opened or closed at the same time.

Air must be cooled, filtered, and water and impurities removed. The air inlet of pneumatic valve must be equipped with triple air filter, filter, pressure regulating valve and oil filter. When transporting compressed air for a long distance, please set an air storage tank near the site to stabilize the air pressure. All air pipes and air pipe joints shall not leak. When installing the pneumatic valve, do not use excessive force to damage the components.

Pneumatic valve is driven by compressed air to realize on-off or adjustment control. The quality of air source directly affects the good and stable use of pneumatic valve. High-quality air source can prolong the service life of pneumatic valve, so pneumatic valve has certain requirements for the quality of air source.

Pneumatic valve is a kind of hardware pneumatic valve which controls the valve by air compression. Its appearance facilitates the engineering operation of related industries and saves a lot of energy costs for enterprises.