How to adjust the temperature difference of wall-hung boiler

Calculate how much it will cost to decorate your home.

When using the wall-hung boiler, we must pay attention to whether the indoor temperature is quite different from the set temperature of the wall-hung boiler. If there are differences, how to adjust? Today, Bian Xiao will explain the specific adjustment methods.

First, how to adjust the temperature difference of the wall-hung boiler?

1, the temperature can be adjusted directly by the up and down arrows or the plus or minus sign on the wall-hung boiler panel; 2, can be adjusted by the thermostat. If there are elderly people living together at home, it is actually more appropriate to install a thermostat, because the thermostat is relatively simple to operate, and the elderly can operate it with a little learning.

2. How appropriate is the backwater temperature setting of the wall-hung boiler?

It depends on the temperature inside the water pipe. If it is 50 degrees, the temperature inside return pipe is about 10 degrees. If the temperature in return pipe is low, the outlet temperature of the wall-hung boiler can be increased.

3. What should I pay attention to when using the wall-hung boiler?

1. Before use, check whether the pressure of the wall-hung boiler is normal. If it is lower than 1.0, manually adjust it to 1.0~ 1.5.

2. Check whether there is water shortage inside the wall-hung boiler. If there is water shortage, you can't heat the wall-hung boiler under water shortage. When adding water, close the cold water valve first, and then turn on the water injection switch.

3. When using the wall-hung boiler in winter, it is recommended not to turn off the power supply of the wall-hung boiler, because the system of the wall-hung boiler may be broken after being turned off.

4. When it is found that the boiling water flow of the wall-hung boiler is relatively small, be sure to pay attention to whether the filter screen of the wall-hung boiler is blocked. If it is a little blocked, remove the connector and clean the filter.

4. How to set the heating temperature of the wall-hung boiler?

When using the wall-hung boiler for heating, the temperature can be set according to the time period, for example, it can be set to 20 degrees Celsius in the morning and afternoon, and it can be set to 15 degrees Celsius to 18 degrees Celsius at night.

As long as the temperature is set within a reasonable range, the wall-hung boiler can be used for heating, which can not only save gas, but also improve the comfort of indoor living.

Enter the area and get the decoration quotation for free.

Enter the area and get the decoration quotation for free.