What's wrong with Fox refueling at low speed?

Pacific Auto Network's sense of frustration at low speed, when driving at low speed, the gears frequently switch between the first gear and the second gear, and the clutch needs to be constantly disengaged and combined, which can not successfully complete the power transmission in a short time, resulting in a common sense of frustration at low speed. Common setbacks are generally caused by gearbox shifting, and gearboxes include upshift setbacks; The response speed of the gearbox is not fast enough, and the gearbox has a slight setback when shifting gears.

Downshift frustrated; Generally, when slowing down, the driver releases the accelerator pedal or presses the brake pedal. At this time, the generator will start to work immediately, which will cause a certain burden on the engine and affect the engine speed, resulting in the unsynchronized engine speed and clutch plate speed, which will produce a sense of frustration. When decelerating sharply, the gear position is out of sync with the vehicle speed, and it will quickly downshift, with a slight setback.

When driving at low speed, the gears frequently switch between the first gear and the second gear, and the clutch needs to be constantly disengaged and combined, which can not successfully complete the power transmission in a short time, resulting in common low-speed frustration.

Generally speaking, there are many reasons for jitter and frustration, such as throttle, spark plug, ignition coil, nozzle and so on.

If the accelerator is dirty, the vehicle will shake at idle speed, so it is not easy to hit the car. But judging from our fault situation, the idle speed is stable and there is no problem with ignition.

Spark plug, if you feel frustrated, idling jitter and acceleration performance decline during driving, you should consider whether it is time to change the spark plug.

More than half an hour after the spark plug, the engineer found me and said that your spark plug was not working, and the four ignition coils were not working, so they all had to be replaced.