What is the matching method of Toyota Reiz throttle?

Pacific Auto Network turns off the ignition switch and waits at least 10 second. Loosen the accelerator pedal completely, turn the ignition switch to the on position, and wait for 3 seconds. Repeat the following operations five times quickly within five seconds, fully depress the accelerator pedal, and then fully release the accelerator pedal. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up.

Fully release the accelerator pedal within 3 seconds after the MIL light is turned on. Start the engine and let it idle for a period of time. Idle for more than 20 seconds, and let the engine run at high speed for two or three times to ensure that the idling speed and ignition timing meet the requirements. This program takes a lot of time, so you'd better use a stopwatch.

Throttle is the throat of automobile engine, which is a controllable valve to control air entering the engine. The depth of stepping on the accelerator is directly related to the opening of the accelerator, so the performance of idle speed (engine revolutions) and power (speed increase) is closely related to the cleanliness of the accelerator. Generally speaking, the throttle valve is a valve that controls air to enter the engine. After air enters the intake pipe, it will mix with fuel to form combustible gas and burn. It connects the air cleaner and the engine, so it is the throat of the engine. (Photo/Text/Photo: Pacific Auto Network Wu Binbin)