Traditional Culture Encyclopedia - The 24 Solar Terms - Method for clean throttle valve of wall-hung boiler

Method for clean throttle valve of wall-hung boiler

Wall-hung boiler is a common heating equipment in our family, which will block the throttle if used for a long time. If the throttle valve is not cleaned in time, it will lead to incomplete combustion, affect the normal use effect of the wall-hung boiler, waste energy and increase household expenses. Therefore, it is very important to clean the air door of the wall-hung boiler.

Next, I will introduce the cleaning method of the throttle valve of the wall-hung boiler.

Step 1: Turn off the power supply and wait for the furnace body to cool completely. This step is very important. You must wait until the furnace body is completely cooled before proceeding to the next step.

Step 2: Open the panel of the wall-hung boiler. This will make it easier for us to clean the throttle.

Step 3: Remove the combustion chamber cover and the throttle. Pay attention to this step, and be careful not to damage the combustion chamber and throttle.

Step 4: Clean the throttle valve with special tools. The cleaning method is to gently wipe the dust and impurities on the throttle with a small steel ball.

Step 5: Reinstall the throttle and combustion chamber cover.

Step 6: Cover the wall-hung boiler panel and power on. Check whether the wall-hung boiler is in normal use.

The above are the specific steps to clean the throttle valve of the wall-hung boiler. It should be noted that the power supply must be turned off before cleaning, and the furnace body must be completely cooled to avoid safety accidents. If conditions permit, it is recommended to use cleaning agent for better effect. During normal use, we should also pay attention to cleaning the wall-hung boiler regularly to avoid serious blockage of the throttle valve and affect the use effect.