What is the high idle speed after cleaning the throttle of Honda xrv?

The reasons for the high idle speed of Honda xrv in Pacific Auto Network after cleaning the throttle are: 1, the throttle is stuck and closed loosely; 2, idle speed control valve failure; 3, water temperature sensor failure; 4. Air leakage in the air intake system; 5, air conditioning switch and power steering gear pressure switch failure.

After cleaning the accelerator of Honda xrv, you need to use HDS for matching, because the operation of professional computer software is more complicated. It is recommended that the owner clean the throttle and go to the 4S shop for free selection.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works by pulling a cable (soft steel wire) or a pull rod. One end of the cable is connected with the accelerator pedal, and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air.

The reasons for the high idle speed of Honda xrv throttle after cleaning are: 1, the throttle is stuck and closed loosely; 2, idle speed control valve failure; 3, water temperature sensor failure; 4. Air leakage in the air intake system; 5, air conditioning switch and power steering gear pressure switch failure.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)