Corolla 1.2 How to clean the throttle?

The throttle valve is connected to the air filter once, and you can find the throttle valve along the air pipeline. Remove the fixing screw of the throttle, remove the throttle seat, pull the throttle by hand to open it completely, spray the throttle cleaner on the cotton cloth, and wipe the dirty part of the throttle until it is clean. Just buy accelerator cleaning agent in advance.

Toyota Corolla's throttle is generally cleaned once every 30,000-40,000 kilometers, depending on the driving situation and driving mode of the vehicle. If it is used for urban driving for a long time, stop and go, and the air quality is poor, it is recommended to clean the throttle. If the road conditions are good, the cleaning can be postponed.

The throttle valve is connected to the air filter once, and you can find the throttle valve along the air pipeline. Remove the fixing screw of the throttle, remove the throttle seat, pull the throttle by hand to open it completely, spray the throttle cleaner on the cotton cloth, and wipe the dirty part of the throttle until it is clean. Just buy accelerator cleaning agent in advance.

Corolla Throttle Matching Method 08 Toyota Corolla Throttle Matching: The first method is to turn on the key, the second gear instrument is fully lit, then wait for 20 seconds, keep the accelerator pedal for about 10 second, release the throttle, turn off the ignition switch, pull out the key, and complete the initialization. The second is to turn on the key, keep the second gear instrument on for 30 seconds, then turn off the ignition switch and pull out the key. It should be noted that it will take some time to get on the bus after the two methods are finished. It usually takes 15-20 seconds. See if it's normal after landing. If you don't succeed at first, do it again until you succeed.

(Photo/Text/Photo: Ask and Answer the Beast) Mercedes-Benz S-Class Questioning Li Yi Buick GL8 P5 Xpeng Motors P7 @ 20 19