How to Adjust the Sensitivity of Electronic Throttle

Adjust the electronic throttle as follows: 1. Preparation tools: screwdriver, 10 mm short handle sleeve, 12 mm short handle sleeve. 2. Unplug the key, and then unplug the electronic accelerator pedal. 3. Remove two nuts and one screw, and you can take out the accelerator pedal. 4. Loosen four white screws and remove one black fixing screw. Plug in the plug when adjusting, and the car will catch fire. Swing from side to side, step on the gas pedal and debug slowly. 6. After debugging, you can give oil with a touch of the throttle. In other words, as soon as you step on the accelerator, the tachometer turns. 7. Adjust it and put it back. It should be noted that if the engine fault light is on, the switch is not turned off correctly. The electronic throttle sensor is just an adjustable resistor. After a long time, it is normal for the electronic throttle to delay for a few seconds. In reality, if you want to adjust the sensitivity of the electronic throttle, it is recommended to go to a 4S shop or a professional auto repair shop and let technicians operate it. This process is more complicated, and it is easy to have problems when you operate it yourself.