Use of cleaning agent for air intake system

1. Clean the cleaning agent with the cleaning equipment of the fuel system, start the engine to idle until the engine reaches the working temperature, and then shut down the engine.

2. Open the intake pipe from the nearest air door.

3. Screw the quick connector onto the cleaning tank and insert the rear end into the air inlet pipe.

4. Start the engine and keep it at high idle speed.

5. Quickly connect the pipe connector to the quick connector and turn the cleaning agent tank upside down.

6. Keep the rotating speed at1500rpm to remove the carbon deposit in the engine air intake system.

7. After cleaning, turn off the engine and reconnect the intake pipe.

8, directly added to the fuel tank, generally can add 60L-80L fuel per bottle.

9, generally every 1-20000 km cleaning.