How to clean the throttle of Ruifeng s3?

Disassembly and cleaning method of Sharp s3 throttle: first remove the engine cover of 10mm sleeve, and then remove the engine cover of 10mm sleeve. Remove the air intake plastic pipe. Lever up the middle of the plastic clip with a screwdriver, gently pull out and remove the air inlet. Then remove the pipe from the intake hose and loosen the screw near the throttle clamp with an 8 mm sleeve. Loosen the other one

How to clean the throttle of Ruifeng s3?

Disassembly and cleaning method of Sharp s3 throttle: first remove the engine cover of 10mm sleeve, and then remove the engine cover of 10mm sleeve. Remove the air intake plastic pipe. Lever up the middle of the plastic clip with a screwdriver, gently pull out and remove the air inlet. Then remove the pipe from the intake hose and loosen the screw near the throttle clamp with an 8 mm sleeve.

Loosen the screw at the other end, and remove the air inlet hose between the air cleaner and the throttle valve, which can be removed only with light force. Remove the rubber hose of the carbon charging solenoid valve, clamp the clamp with pliers and pull it out. Remove the hose in this way, and the other two pipes of the throttle valve are also removed. Be careful that the water pipe will drip a little, so remove the throttle valve.

Then use an 8 mm sleeve, which is much more convenient, otherwise it will take a lot of effort and the throttle valve will still be dirty when it is completely removed. Be careful not to unplug the connecting plug with the throttle valve at this time, and keep the connecting pipeline firmly in contact with the throttle valve during the whole cleaning process. The whole throttle valve has been removed, and it is still dirty.

Be careful not to unplug the connecting plug of the throttle valve at this time. During the whole cleaning process, keep the connecting wire in close contact with the throttle valve. This is a 3M throttle (door) cleaner. It is best not to use carburetor cleaner. Adjust the movable trigger, change the direction of ratchet wrench, install throttle valve and connect all pipes. Pay attention to the wrong connection between the upper and lower pipes of the throttle valve. After cleaning and installation, the pipeline has been connected.

What glass water does Ruifeng s3 add?

Ruifeng s3 can be added with ordinary glass water, with complete performance, simple use and automatic control. You can fill it up by adding 4L at a time. When adding, open the hood, there is a blue cover, which is the entrance to add glass water. Just add it.

Glass water on the market can generally be divided into three categories. One is for summer. On the basis of the original components, the insecticidal glue component is added, which can quickly remove the flying insect residues that hit the windshield, and also has a good removal effect on the flying insect residues on the front face of the car. The second kind of antifreeze glass water is specially used in winter to ensure that when the outside temperature is below MINUS 20℃, it will not freeze and will not damage the automobile facilities.

Some high-quality glass water with good quality also has the functions of melting ice and snow quickly, preventing glare and fog, which plays an important role in improving driving safety. The third type is a special anti-freezing type, which can prevent freezing at MINUS 40℃ and is suitable for extremely cold areas in the northernmost part of China.

Some car owners mix their glass water with detergent, detergent and washing powder. Others just use clean water instead of glass water. When it is cold in winter and it is necessary to clean the windshield on the road, the glass water can not only clean effectively, but also absorb static electricity, which is very convenient.

Related hot search:

1. Homemade glass water is harmful.

2. Which is better, wiper essence or glass water?

3. Adding glass water to antifreeze by mistake.

How to clean the throttle of Ruifeng s3 @20 19