Suzuki rode over the gas at a high idle speed.

1. First, check whether the throttle valve is fully closed and the throttle cable is stuck at idle speed. Pull the throttle rocker arm in the closing direction by hand. If the engine idle speed can be reduced to normal speed, it means that the throttle valve is stuck, which is not relevant.

2. Secondly, if the accelerator cable is stuck, replace the cable; If the throttle shaft is stuck, remove and clean the throttle body.

3. Then readjust the idle speed and reset the engine computer according to the prescribed procedures of the engine. The so-called engine computer reset is to erase the fault memory in the engine computer and let it learn idle speed again.

4. Finally, for most electronically controlled engines, when the engine reaches normal temperature and the idle valve is completely closed, the basic idle speed is set to (50050)rpm.