Why did Zotye t600 report the fault code p 1297?

The fault code p 1297 reported by Zotye t600 in Pacific Auto Network indicates that the circuit voltage of the electric load sensor is too low, and there is also a pressure drop between the exhaust gas turbocharger and the throttle. This fault may be caused by the damage of the throttle, and it can be solved by checking and replacing the throttle.

Automobile fault codes can be divided into two types, one is accidental fault and the other is actual fault. Usually accidental faults can be cleared as long as they don't appear again, but if they are actual faults, they must be repaired before they can be cleared. The self-diagnosis system can't call out the fault code when the line is in the following situations: 1, the line connecting the ignition switch, ECU, fault warning light (check) and communication interface is open or short-circuited; 2. The output signal of self-diagnosis is abnormal due to ECU failure; 3. Fault warning light (check) and communication interface are damaged.

The clearing method of p 1297 fault code is: cut off the fuse of ECU standby power supply for more than 20s, remove the negative grounding terminal of storage battery for more than 20s, and read the data stream and fault code with a decoder to clear it. P 1297 fault code, it is best to check the line problem first and solve it. Generally, the sensor is dirty or the line is short-circuited or open-circuited, which can also cause faults. For occasional faults, the above methods can be used to clear them. (Photo/Text/Photo: Pacific Auto Network Wu Binbin)