Video tutorial on how to clean idling motor

The idle motor adjusts the idle speed ratio of the automobile according to the change of the total gas flow in the gas channel. As we all know, because there is a lot of dust in the air, a lot of dirt is likely to accumulate at the spool of idle motor and high-pressure gate valve when the automobile engine is running. When too much dirt is deposited, the automobile engine may have idling jitter, idling jitter, idling flameout and so on, and it needs to be cleaned immediately. How to clean the idling motor?

The idle motor is installed on the electronic throttle. Pull out the power plug, unscrew it, and then clean the carburetor cleaner. It must be noted that the idle motor is a high-precision component. When cleaning, the cone head of the motor must face down, then spray cleaning agent on the cone head and part of the waterproof shell, and then wipe it clean with a rag, which can also prevent the cleaning agent from spraying into the motor and causing damage.

For the whole process of actual cleaning, please refer to the following video of idle motor cleaning tutorial:

Some people say that idle motors must be oiled after cleaning, which is good for motors; And some people say that you can't put oil on it, which is very easy to remove dust. If a small partner with strong self-learning ability wants to lubricate the idling motor, it is necessary to disassemble the idling motor and then lubricate the rolling bearing and rotor. However, generally idle motors do not need to be coated with grease or lubricating oil. If the idle motor has common faults, it will be removed and replaced immediately.