Sixth generation Camry cleaning accelerator

Cleaning method of the sixth generation Camry 200g throttle: 1. Cleaning the throttle valve is a very routine maintenance and cleaning work. When the engine runs for a long time, carbon deposits are formed near the throttle body, resulting in poor road conditions and dust, which leads to lax throttle closing, unstable or high idle speed, change in air intake, impact on fuel supply, insufficient power output and slow throttle response. 2, the road oil is not good, 20,000 to 30,000 kilometers need to be cleaned. There is no conventional cleaning method for valve cleaning. Cleaning requires disassembling the engine and taking out the valve. Generally100000 km of carbon deposits attached to the top of the valve will affect the valve closing. I think you may need to type fewer words, but clean the throttle. 3. Cleaning includes in-vehicle cleaning and disassembly cleaning. In-car cleaning is usually carried out by hanging infusion bottles and special instruments, which are more common in 4s repair shops. Remove the throttle body and clean it thoroughly. High-end cars need to use special testing computers for matching learning, otherwise there will be problems such as unstable idle speed, driving and high idle speed. There is plenty of room at the throttle door, so you can clean it yourself in the car. Remove the intake hose and a throttle cleaner, spray it on the carbon deposit, wipe it with a damp cloth, and pull the wire. Electronic throttle is not recommended to be cleaned by itself, and it needs to be matched.