Cleaning Method of Toyota Crown Throttle

Cleaning method of Toyota Crown throttle valve

For the problem of how to disassemble the Toyota Crown throttle, it is suggested that unfamiliar friends should not try it easily. After all, removing the throttle is a complicated process. You need some equipment to remove it. But we can still do general cleaning. This disassembly is a simple disassembly. Just unscrew the screw that fixes the valve hose with a wrench and remove it, and see the valve opening of the throttle valve. Then do a simple cleaning. If it is complicated, such as overall disassembly and cleaning, it is recommended to go to a professional place.

Pay attention to the method when cleaning the throttle. First remove the intake throat, expose the throttle valve, remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle valve, spray a small amount of "carburetor cleaner" into the throttle valve, and then carefully scrub it with a polyester rag or a high-spin "non-woven fabric". Deep in the throttle, you can hold a rag and scrub it carefully where your hands can't reach it. After cleaning, the throttle will be initialized according to the disassembly procedure just now. After cleaning the throttle, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to make the air intake in a normal state.