What if Haval h6 manual gear is boring to climb?

The poor climbing of Haval h6 in Pacific Auto Network may be due to the lack of power due to excessive carbon deposition in the engine. It's best to check whether the spark plug of the car needs to be replaced or clean the throttle. Too much throttle sludge will cause poor engine acceleration and increase fuel consumption. When cleaning the throttle, you can go to the 4S store or clean it yourself.

The boring climbing of Haval h6 may be due to the lack of power caused by too much carbon deposit in the engine of the car. It's best to check whether the spark plug of the car needs to be replaced or clean the throttle.

Too much throttle sludge will cause poor engine acceleration and increase fuel consumption. When cleaning the throttle, you can go to the 4S store or clean it yourself. Apply a little oil to the fixed metal beam ring first to avoid slipping teeth during disassembly. Remove the metal wire harness ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spin "non-woven fabric". Deep in the throttle, you can hold the rag and scrub it carefully where your hands can't reach it. After cleaning, the throttle valve will be initialized after installation according to the disassembly procedure. After cleaning the throttle, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to make the air intake in a normal state.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)