How to clean the BMW 5 Series throttle, and how to clean the BMW 5 Series throttle.

Cleaning Steps of BMW 5 Series Throttle: BMW 5 Series Cleaning Throttle. It is best not to stop immediately, because the temperature in the cabin is high, which may burn your skin. It is suggested to stop for a while and wait for the temperature of the carriage to drop. Before cleaning, you need to first determine the position of the throttle valve. The throttle valve is located behind the air inlet, so it is not far to find an empty air filter. Every car will be in a different position. The throttle of some models will be covered by the engine cover, so it will be more intuitive to open the cover to check. Open the cover of BMW 5 Series engine, and you can clearly see the position of the throttle. To remove the throttle valve, you must first remove the hose connecting the air cleaner and the throttle valve. Both ends of the hose are fixed with circular iron hoops, and the iron hoops are fixed with screws. After loosening the screws, the hose can be pulled out. After the screw is loosened, hold one end of the hose with both hands and push it back, and the hose will be removed. Some vehicle hoses may not be easily disassembled or installed firmly, so it is not easy to disassemble. Don't pull them hard, it's easy to damage the hoses. You can try to twist them left and right at the same time, and then take a step back after the whole is loose. You can see the throttle when the hose is lowered. At this time, the periphery of the throttle is generally not dirty, but the inside is really dirty. If you want to see the situation inside, you need to open the key door and turn on the power of the vehicle, but you can't. When you step on the accelerator pedal, the accelerator will open. At this time, you can clearly see that there will be brown dirt inside the throttle.