What happened to the MG 6 engine shaking the engine fault light?

The reasons why MG 6 engine shakes the engine fault light are: 1, poor combustion of engine mixture; 2. Abnormal fuel supply pressure; 3, spark plug electrode gap wear; 4. Ignition coil failure; 5. The rubber parts of the starting bracket or gearbox bracket are aging; 6. The throttle is blocked.

Causes of failure light of MG-6 engine;

1, unscheduled maintenance Usually people always like to spend a lot of money on modification, but it is easy to ignore the regular maintenance of the engine. According to professional automobile maintenance operators, failures caused by poor engine maintenance account for about 50% of the total failures. "It can be seen that the maintenance of the engine can play a vital role in prolonging the service life of the vehicle;

2. Oil deterioration The oil quality of different grades of lubricating oil will change during use. After a certain mileage, the performance of the vehicle will change, which may bring various problems to the engine. In order to avoid these failures, we should change the oil of the car regularly according to the use situation, so that the oil quantity is moderate, generally between the upper and lower limits of the oil meter. When the oil passes through the pores of the oil filter element, solid particles and viscous substances in the oil will accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element smoothly, the filter element will burst or the safety valve will be opened to pass through the bypass valve, which will still bring dirt back to the lubrication part, accelerate engine wear and increase internal pollution. Therefore, it is equally important to replace the oil filter regularly;

3. The engine air intake system blocked by air filter element is mainly composed of air filter element and air inlet. According to different use conditions, the air filter element should be cleaned regularly. Available methods include blowing high-pressure air from the inside out to blow out the dust in the filter element. Because the air filter element is paper, pay attention to the air pressure when blowing to avoid damaging the filter element. Generally, the air filter element should be replaced after three cleanings, and the cleaning cycle can be determined according to the air quality in the daily driving area.

(Photo/Text/Photo: Ask and Answer Animals) @20 19