What's wrong with flushing the toilet?

Toilet is one of the most commonly used facilities in daily life, and its normal use requires flushing and seepage prevention. However, when we use the toilet, we sometimes encounter poor flushing and water seepage. If this situation continues, it will bring great inconvenience to our lives and even form a sanitary corner, which will affect the home environment. So, what is the reason for the toilet seepage?

1. Flushing problem

(1) Insufficient water level in the water tank: In general, it is not easy to flush when the bottom water level is below 2 cm. When the toilet is in use, the water level in the water tank is too low, which will lead to poor flushing, so it is necessary to check the water level in the water tank in time to ensure that the water level is in the correct position.

(2) The inner diameter of the water tank is too small: the inner diameter of the water tank in some toilets is too small, and it will be difficult to clean once there are large objects such as feces. At this time, you can consider replacing the water tank with a larger inner diameter.

(3) Water pipe dredging: after long-term use, impurities, sediments, etc. It is easy to appear inside the water pipe, leading to blockage in the process of water flow. Just remove the water pipe and clean it.

(4) Inappropriate flushing device parameters: Some toilet flushing devices have inappropriate parameters, resulting in too small or too large water flow during flushing, resulting in waste of water resources and unclean flushing.

2. Water seepage problem

(1) Choke well blockage: Some toilets are designed with small gas wells, which may easily cause sewage at the bottom not to be discharged, leaving a pool of water to form seepage, which can be solved by cleaning the choke well.

(2) Poor sealing of the choke well: If the liquid level in the choke well is too high, poor sealing of the choke well will cause the surrounding ground to be flooded.

(3) Cracking of floor tiles: the bathroom is paved with tiles, which will age with the extension of service time, leading to cracking or loosening of tiles, thus causing the problem of water seepage. Cracks in tiles can be resurfaced or repaired.

To sum up, there are many reasons for the problem of toilet flushing water seepage, but it is not particularly difficult to solve these problems. These problems can be avoided and solved as long as they are inspected, maintained and repaired regularly. At the same time, we should also pay attention to saving water and avoiding waste and discharge in daily life, so as to achieve the purpose of saving and protecting the environment.