How to open the Jaguar XEL engine compartment, Jaguar XEL engine compartment cleaning tutorial

Correct opening method of 202 1 Jaguar XEL engine compartment:

1, find the handle switch near the driver's pedal, pull the unlock handle, and then the engine cover will open a gap;

2. Put your hand into the gap in front of the car and pull the safety switch to lift the engine compartment cover upward;

3. After turning on the safety switch, take out the support rod of the engine compartment cover and clamp the top buckle into the engine compartment cover to support the engine compartment cover. (If equipped with hydraulic support, manual support is not required)

Turn it on and turn it off. Compared with opening the engine compartment, the closing step will be simpler and more convenient. Hold the hood and loosen the hood support rod. If it is hydraulic, this operation is not needed, and the engine hood will be lowered slowly. Finally, put your hand directly above the engine compartment cover and press it gently. After the engine compartment cover is firmly locked, you can close the engine compartment.

Cleaning process of Jaguar XEL engine compartment

If the car has been driving on the road for a period of time before cleaning the engine compartment, please let the engine cool down first to avoid burns during cleaning.

1 Clean the dust and sundries visible to the naked eye on the surface.

Before cleaning, clean the impurities and dust on the engine surface with a brush.

2 clean grease

Oil dirties are easy to be produced during engine operation, and it is difficult to clean the solidified oil dirties. Spray a special cleaning agent on all parts to break down the grease, and then wipe it with a towel. Spray more cleaning agents on particularly dirty places and brush them with a small brush.

3 Rinse with water after cleaning.

When washing with mild water, the water pressure is high, which will cause oxidation or short circuit of electronic components such as computers and sensors, and there are potential safety hazards.

4 dry and do polishing care.

After cleaning, thoroughly wipe all parts of the engine compartment with a clean cloth, and then spray polishing agent for care.