How to reconfigure the remote control after the power failure of Lexus rx270?

1. Disconnect the battery or remove the RGTM fuse. Disconnect the battery and remove RGTM fuse (F85 Rear Door Trunk Module (RGTM)).

2. Note: Before entering the initialization mode, disconnect the battery power of RGTM for 20 seconds. Wait for 20 seconds, reconnect the battery or reinstall the RGTM fuse. Reconnect the battery, torque: 5Nm. Note: After disconnecting the battery, initialize the door and window motors when reconnecting. Reinstall RGTM fuse (F85 Rear Door Trunk Module (RGTM)).

3. If the elevator door is not in the fully closed position, manually close and completely lock the electric elevator door. 4. Note: If equipped with electric liftgate system, make sure that the electric liftgate system in the information center has been opened before performing this step. Note: If the power liftgate does not open in this step, refer to the symptom table to diagnose the faulty power liftgate. Use the programmed RKE transmitter or the front control switch to electrically open the elevator door.

5. Once the elevator door is fully opened, use the programmed RKE transmitter or the front electric elevator door control switch to electrically close the elevator door.