How to adjust the throttle cable correctly?

Adjustment method of automobile accelerator cable: 1. First of all, adjusting the virtual position of the throttle is actually adjusting the tension of the throttle cable. The throttle cable is tied to the throttle. From the accelerator to the accelerator cable bracket, it is found that the cable is not fully tensioned and the cable has a certain deflection, which is about 5-8 mm for ordinary cars;

2. If you want to reduce the virtual position of the throttle, that is, reduce the deflection, the adjustment mechanism is located on the throttle cable holder, but it is not recommended to do so. Unless your driving style is more radical, don't change the deflection angle to less than 3 mm, which will inadvertently consume more fuel;

3. Try not to adjust too much each time. After adjustment, check the deflection of the wire rope. It is best to control it within a suitable range. Too tight may increase idle speed. Some car throttle lines are not fixed on the bracket, but fixed with nuts. When adjusting, loosen the fixing nut with a small wrench, rotate the position of the adjusting nut again, and adjust the throttle pipe to loosen it.

Million car purchase subsidy