Discussion on the installation method of air support for cabinet door panel

1. Determine the installation position: the installation position of the pneumatic strut of the cabinet door panel should be at the upper part of the cabinet door panel, about 1/3 away from the edge. 2. Mounting bracket: Fix the air support bracket on the inner side plate of the cabinet, and pay attention to the position of the bracket to align with the mounting hole on the door panel. 3. Install the air strut: insert one end of the air strut into the bracket and the other end into the mounting hole on the door panel, and then fix it with screws. 4. Adjust the strength of air support: according to the weight and size of the door panel, adjust the strength of air support, so that the door panel can be easily opened and closed, but it will not automatically close. 5. Install multiple air struts: If the door panel is large or heavy, you need to install multiple air struts, and then install them one by one according to the above steps. 6. Test: After installation, test whether the door panel can be opened and closed smoothly and whether the air strut can effectively support the door panel. If there is any problem, adjust or replace the air strut in time.