How to use BMW 5 Series rescncl

Res is the recovery set speed of cruise control, and CNCL means the cancellation set speed. Therefore, rescncl has two functions, one is to accelerate the use after setting the fixed speed cruise, and the other is to press RES to return to the previously set speed after temporarily canceling the fixed speed cruise.

The driver can select the speed according to the road conditions, and start the cruise control system by inching the rescncl switch instead of the accelerator pedal control. According to the influence of ramp and road conditions on the speed, the fuel supply is automatically adjusted, and the vehicle can automatically travel at a constant speed.

With this device, when driving on the expressway for a long time, the driver does not need to control the accelerator pedal, which reduces fatigue, unnecessary speed change and saves fuel.

The working principle of the cruise control system is simply that the cruise control module reads the pulse signal sent by the vehicle speed sensor and compares it with the set speed, so as to send instructions to the servo to mechanically adjust the increase or decrease of the throttle opening to keep the vehicle at the set speed all the time.

The size of BMW 5 Series wiper is 26/18; Replacement steps of BMW 5 Series wiper: Open the outer plastic cover of the old wiper, then push the old wiper rod slightly to expose the bracket hook, then take it from the empty position and put it back into a new one. Open the outer plastic cover of the old wiper, then push the old wiper rod slightly, then take it off from the empty position and put it back into a new one.

(Photo/Text/Photo: Ask and Answer the Beast) Model Y Model 3 Model X V Li ONE Xpeng Motors P7 @20 19