How do pupils make kites? What materials do you need?

Newspaper, bamboo filament, knife, adhesive tape, thin thread.

Specific steps:

1. Prepare a newspaper and cut it into squares and small rectangles, as shown below.

2. Prepare two small bamboo filaments (bamboo mats can be used instead), one is the diagonal length of the newspaper, and the other is the diagonal bow length of the newspaper. As shown below.

3. Stick the short bamboo filament on the diagonal of the square newspaper with adhesive tape, as shown in the figure.

Cut a thread from another newspaper to make a kite's tail. The tail accounts for about three quarters of the whole kite. As shown in the figure.

5. Connect and paste the cut newspaper strips on the bow tail of the kite, as shown in the figure.

6. Finally, tie the kite with a drawstring, which accounts for about 2 parts of 1, and cannot be tied too high. The lower position is probably the horizontal position of the two ends of the bow-shaped bamboo wire or a little lower. Tie it, pull the rope with your hand, pull up the kite and run, and try the power of the kite. As shown in the figure.

7. A kite is made, as shown in the figure.