How to disassemble and clean Toyota Crown Throttle?

As for how to remove the throttle of Toyota Crown, it is suggested that unfamiliar friends should not try it easily. After all, removing the throttle is a complicated process. It needs to disassemble some equipment. But we can still do general cleaning, that is, conventional cleaning. This disassembly is a simple disassembly. As long as you take a wrench and unscrew the screw that fixes the valve hose, you can see the valve opening of the throttle. Then do a simple cleaning. If it is complicated, such as overall disassembly and cleaning, it is recommended to go to a professional place. Pay attention to the method when cleaning the throttle. First, remove the intake throat, expose the throttle valve, remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle plate, spray a small amount of "carburetor cleaner" into the throttle valve, and then carefully scrub it with polyester rag or high-spun "non-woven fabric" to reach the throttle valve. Hold the rag and scrub it carefully. After cleaning, follow the disassembly procedure just now, and start the initialization of the throttle valve after installation. It needs to be initialized after cleaning the throttle, because the computer has a memory function when adjusting the throttle opening. Because there was sludge blockage before, in order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.