How to make a bamboo dustpan How to make a bamboo dustpan

1, flat knitting (hexagonal hole knitting) is designed, and economical bamboo dustpan is adopted. According to the size of the bamboo dustpan, determine the number of bamboo pieces. Generally, there are 9 pieces, 12 pieces, 15 pieces, 18 pieces, 2 1 piece, and 24 pieces. Generally, 9 bamboo dustpans with a diameter less than 625px are used, and 2 1-24 are generally used.

2. This knitting method uses less materials and is relatively simple to set up. This is also a common bottom knitting method for economical bamboo dustpans. Because it is necessary to maintain the warp density around the dustpan, each size has a default number of woven pieces, and the warp density can be increased by increasing the number of bamboo strips at the bottom.

3. Swing weaving (wheel weaving) is radial. This weaving method is adopted by a few bamboo weavers, mainly through this weaving pattern to increase the aesthetics, which is much better than the flat-bottomed woven dustpan. Bamboo weavers often use this bottom weaving method because bamboo mats are made of good materials and can earn more, generally ranging from 10 to 20 pieces and 40 pieces. Of course, when the size of the bamboo dustpan is large enough, it will be forced to adopt this weaving method to maintain the density of the edge warp needles, which is one of the reasons why few artists are willing to weave the bamboo dustpan after exceeding the conventional size.

4. This knitting method uses a lot of materials, and the same size also surpasses the flat-bottom knitting method, and it also surpasses the flat-bottom knitting method in time consumption. This knitting method has the advantage of maintaining the density of the edge in the warp and weft, and is superior to the flat-bottom knitting method in both modeling and aesthetics.

5. The dense bottom structure (round bottom structure) can be regarded as the deformed structure of eddy current winnowing. Woven 12, 24, 36, 48, etc. And it is woven with dense bamboo filaments, which greatly exceeds the aesthetics of the first two weaving methods. But the bamboo filaments at the bottom are difficult to weave because of their high density. The bamboo dustpan thus made can be used for collection and decoration. Of course, the manual weaving technology that can be used for bamboo collection and decoration must be top-notch, otherwise even the bamboo dustpan so woven is just a waste.

6. The above three kinds of bottom weaving are the characteristics that can visually distinguish the quality of bamboo dustpans, and they are also the external forms that laymen who are not familiar with the bamboo weaving industry can distinguish. Of course, the advantages and disadvantages of a bamboo dustpan still need a lot of details to refer to.