What is the situation that all the fault lights of Dongfeng Jingyi x5 are on?

Dongfeng popular Jingyi x5 fault lights are all on. It may be that the fuel did not burn completely when the cold car started, and the oxygen sensor detected that the exhaust gas exceeded the standard.

Solution: Sprinkle some water on the car and blow it with the wind. When the car is hot, the water temperature is normal, the combustion is full, the exhaust emission is within the specified range, the fault indicator lamp is extinguished, and the fault is relieved.

Extended data:

Dongfeng Fengxing Jingyi x5 fault code:

P0AD9: Hybrid battery positive contactor control circuit/open circuit. ?

P069F: throttle actuator control lamp control circuit.

P0225: throttle/pedal position sensor/switch c circuit.

P0864: Transmission control module (TCU) communication circuit range/performance.

P0379: ignition timing reference high resolution signal b has no pulse.

P0B4 1: range/performance of hybrid battery voltage monitoring B circuit.

P0B97: Hybrid battery voltage monitoring S circuit is low.

P0 15D: The delayed response (air-fuel ratio) of the oxygen sensor changes from thin to rich (row 2, sensor 1).

P097 1: Control circuit of pressure control solenoid valve C is high.

P05 1D: Crankcase pressure sensor circuit is high.