How to adjust the water quantity of gas water heater?

Gas water heater is a common domestic hot water equipment, and the flow of hot water can be controlled by adjusting the water quantity. The method of adjusting the water quantity of gas water heater will be introduced in detail below.

1. regulating valve: there is a valve at the outlet of the gas water heater, and the flow of hot water can be controlled by adjusting the opening of the valve. The greater the opening angle of the valve, the greater the flow of hot water.

2. Adjust the water mixing valve: The gas water heater adjusts the proportion of cold and hot water through the water mixing valve, thus changing the temperature and flow rate of hot water. The water mixing valve is located under the faucet, and rotates clockwise to increase the proportion of cold water and counterclockwise to increase the proportion of hot water.

3. Check the water pressure: The normal water pressure of gas water heater is usually between 0.02-0.8MPa and 0.8MPa. Too high or too low will affect the hot water flow. You can judge whether the water pressure is normal by observing the indication of the pressure gauge.

4. Cleaning the filter: the water inlet of the gas water heater is equipped with a filter, and cleaning the filter regularly can ensure the normal operation of the water heater.

5. Adjust the gas quantity: The hot water flow of gas water heater is affected by the gas quantity, and adjusting the gas quantity can increase the hot water supply. The gas volume adjustment knob is located on the shell of the water heater, and the gas volume can be increased by rotating it clockwise.

Through the above method, the water quantity of gas water heater can be well adjusted to meet the needs of different users. When using gas water heater, be sure to pay attention to safety and follow the instruction manual.