Does Zotye Z700 Center T need to disassemble the oil pan?

Zotye Z700 with T tone needs to remove the oil pan. If it is necessary to drain oil, remove the oil pan of the oil pump and the timing chain tensioner, and then remove the main gear and camshaft gear in turn. For the timing method, each gear has three points, two on the camshaft, 1 on the timing tooth, and there are also three points on the chain, and the two points that are closer are on the convex circle. There is 1 below. First, install two camshafts so that the tips of the formal teeth and bolts are facing upwards. After installing one, there is a line on the crankshaft, which is verified by the arrow on the body.

How to remove the timing cover

Remove the right wheel first, and then clean the periphery, that is, remove the generator belt, booster pump belt and air conditioning belt, and then remove the right wheel guard, crankshaft pulley and timing belt. After aligning the position, remove the idler, the timing belt and then the tensioner. When installing, install the idler and tensioner first, but do not tighten them. Starting from the idler, install the timing belt. After pressing the timing belt, check the timing position of the upper and lower wheels. Turn it twice by hand to make sure it's all right before installing the others.