What is used to clean the accelerator of a car?

1. Loosen the fastening screws of the empty filter metal clip and the throttle body with a flat screwdriver to separate the empty filter top cover from the throttle body.

2. It is best to clean the electronic throttle with two people, one is responsible for stepping on the throttle and the other is responsible for cleaning. Spray carburetor cleaner on a clean rag, and then wipe it carefully with a rag.

3. After cleaning, check whether the throttle valve is clean and can be opened and closed freely. Then connect the empty filter to the throttle body and make sure it is sealed when it is in place. Tighten the screws of the metal clip, and if there are any sensor connectors, please plug them back in.

4. After cleaning the throttle, learn the throttle initialization.

When cleaning the throttle, be careful: don't unplug the throttle position sensor plug of the automatic transmission vehicle, it is on the throttle body, otherwise the position of the accelerator pedal needs to be reinitialized with the instrument; Be careful not to spray carburetor cleaner on the air cleaner sealing apron of throttle body, which will corrode the apron and affect the sealing performance. When cleaning the throttle, do not spray carburetor cleaner directly into the throttle to avoid the hose falling into the engine. The correct way is to spray carburetor cleaner on a clean rag and then wipe it carefully with a rag. Because the carburetor cleaner is corrosive, it is best not to touch the skin.