How to match the throttle after cleaning in mazda 6? Can hard matching be solved?

After cleaning the throttle, you don't have to match the car.

Cable chokes do not need to be matched. There are more cable throttles than electronic throttles, that is, idle motors. The electronic throttle has no idle motor.

When the non-refueling valve is idling, the throttle valve is completely closed. Air required for idling is input by idling motor. There is no automatic adjustment ability to pull the throttle. If you don't step on it, it will turn off. When you don't step on the accelerator, the computer automatically thinks that the accelerator is completely closed.

Extended data:

The quality of air filter is related to the brand quality of engine oil.

How long the throttle will get dirty depends on the quality of the air filter, the brand and quality of the engine oil used, road conditions, temperature conditions, engine working temperature, driving habits and so on. Even for individuals, it is impossible to determine the time to clean the throttle at a fixed mileage.

The interval between cleaning the throttle for the first time in a new car is the longest. In the future, due to the continuous condensation of oil and gas in the crankcase ventilation pipe and air inlet, the cleaning frequency will increase, and the scaling speed of throttle will be affected under different weather conditions.

Pay attention to how to clean and prevent: take it apart for cleaning; Correct some misunderstandings of throttle cleaning;

The reason of throttle scaling mainly comes from oil vapor, followed by particles and moisture in the air, that is to say, using qualified air filter and removing crankcase ventilation pipe, throttle scaling will be much slower.

The crankshaft is built in the crankcase, and the lower part is connected with the oil bottom. The working temperature of this part is about 100 ~ 180.

Reference resource source:

Baidu encyclopedia-throttling