How to reset the tire pressure of Angkor Sela

Turn on the ignition, press and hold the Gage key on the far right side of the driver information center until the screen on the instrument cluster shows the tire pressure monitoring system, and then press the setting reset key with the arrow until it shows that the tire pressure monitoring system has been reset.

The dashboard of Mazda Angkewei Serra will display the tire pressure information of four wheels, and you can clearly know which tire has problems. For vehicles without driver information center, the way to reset tire pressure is to turn on the ignition switch, press and hold the mileage button, switch the mileage display on the instrument cluster until only the total mileage is displayed, and then press and hold the mileage button again. After a few seconds, the low tire pressure indicator light began to flash, and when two beeps were heard, the reset was completed.

If the above steps are unsuccessful, it is necessary to continue the operation and deflate the four tires in turn. Once the air pressure reaches a certain level, each tire will give an alarm. After the four tires alarm in turn, they are inflated. The air pressure of each tire is between 2.4 and 2.8 bar, and the reset is successful. (Photo/Text/Photo: Chen Min 2) Xingrui Li ONE Model Y Model X Gaohe HiPhi X Zero Run T03 @20 19