Why is the throttle weak when motorcycle is riding?

The problems mainly involve the following points:

1. The mixture of carburetor is very thin. The solution is to adjust the mixing knob.

The carburetor is dirty, so it needs cleaning.

3. Is the air filter blocked? This may be because the air filter is dirty and affects the air intake. The treatment method is to change an air filter.

4, spark plug carbon deposition caused by insufficient ignition energy, the treatment method is to clean the spark plug.

The most common mistake is that riding a bike with the air door open is boring. The treatment method is to check whether the air door is open, and just open and close it.

The accelerator of an automobile engine is generally controlled by a pedal, also called an accelerator pedal, which is a device for controlling the fuel supply of the automobile engine.

The operation of the accelerator pedal should be based on the right heel stepping on the cab floor as the fulcrum, and the sole of the foot lightly stepping on the accelerator pedal, stepping down or relaxing with the extension and flexion of the ankle joint. When stepping on the accelerator pedal, the force should be gentle, so that you can step on it gently and lift it slowly.

When starting the engine, don't step on the accelerator pedal to the end, just slightly higher than the idle accelerator. When starting, it is best to refuel just before the clutch linkage point, and the throttle opening should be medium or small. Loosening the clutch should be closely coordinated with stepping on the accelerator, and the action should be agile.

When operating, increase or decrease the throttle according to the road conditions and actual needs. The selected gear should be suitable, so that the engine can run at medium speed and large throttle most of the time to save fuel. When shifting gears, the coordination of refueling, stepping on the clutch and stepping on the accelerator should be coordinated.