What's wrong with the MG 6 hot car shaking and running out of oil?

The reasons why the MG 6 hot car of Pacific Auto Network can't add oil are: 1, and the fuel is too dirty; 2. The fuel nozzle is blocked; 3. The fuel filter is blocked; 4, fuel pressure regulator failure; 5. The electric fuel pump is not working well; 6. The throttle position sensor is faulty; 7. Computer (ECU) failure; 8. Insufficient cylinder pressure, etc.

There are many reasons why cars can't refuel because of vibration. The main reasons are: too much carbon deposit in the throttle and injector, engine cylinder shortage, unqualified engine oil, direct start of the car without heating, ignition coil failure, low cylinder pressure, air intake system failure and so on.

1, the fuel is too dirty;

2. The fuel nozzle is blocked;

3. The fuel filter is blocked;

4, fuel pressure regulator failure;

5. The electric fuel pump is not working well;

6. The throttle position sensor is faulty;

7. Computer (ECU) failure;

8. Insufficient cylinder pressure, etc. Solution: First, check the oil pump in the mailbox to see if it works normally. This work is a bit tedious, so it is necessary to remove the back seat, open the oil tank and take out the oil pump for inspection. It may be caused by too many impurities in the oil pump to suck in oil. Second, check whether the gas tank is working properly. The gasoline tank is not working, which may also lead to the failure to add oil. And the air intake system is blocked, such as the air filter. Check the air intake system and carry out professional maintenance. Then, see if it is a battery problem. Insufficient battery power may lead to unstable voltage output. The solution is to clean the battery frequently and replenish the electrolyte. Then, the gas distribution phase is wrong, for example, the intake and exhaust valves are not tightly sealed. The solution is to clean the throttle when refueling or add some detergent additives to the fuel.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)