Raptor shaft head clutch solenoid valve does not work.

Raptor bridge clutch is an important part of vehicle transmission system, and the bridge clutch solenoid valve is the key component to control the bridge clutch. If the axle clutch solenoid valve does not work, it may cause the clutch to stick or not work normally.

If the shaft head clutch solenoid valve does not work, you can try the following solutions:

1. Check whether the circuit is normal. Check the connecting wire of the solenoid valve, and check whether the output voltage of the circuit reaches the normal level. If there is any damage or abnormal voltage, please repair or replace it accordingly.

2. Clean the solenoid valve. Clean the solenoid valve and its surrounding environment with some cleaning agents to remove the dust and dirt on the solenoid valve.

3. Replace the solenoid valve. If the problem still exists after trying the above methods, it may be that the solenoid valve itself has failed and needs to be replaced.