Throttle matching shows that the throttle has not reached the mechanical idle stop position.

Throttle matching shows that the throttle has not reached the mechanical idle stop position, and the solution is as follows

1, turn off the ignition switch. 2. Unplug the EFI and ETCS fuses in the engine compartment fuse box, and put them back in place after 1 minute, and the idle learning is completed.

After washing the throttle, the throttle speed will drop slowly, which can be solved by the following settings:

A, disconnect the battery cathode for more than 5 seconds before reassembling.

B turn on the ignition switch to the "on" position, press and hold the accelerator for 5 seconds before releasing it.

C, turn off the ignition switch, start the engine to see if it returns to normal, or repeat A and B several times.