Code for safety management of liquefied gas cylinders

Liquefied gas cylinder is a very common container for storing and transporting gas, but it may cause serious accidents if it is used and managed improperly.

Therefore, the use of liquefied gas cylinders shall comply with the following specifications:

1, clear bottle identification: each liquefied gas bottle must have a clear identification, indicating the type, model, quality and other information of the cylinder;

2. Bottle body is intact: LPG bottles must be inspected for cracks, deformation, scratches and other problems before use;

3, the bottle mouth is well sealed: the bottle mouth of the liquefied gas bottle must be in a sealed state and must have a protective cap;

4. Mixed loading is prohibited: different liquefied gas cylinders are required for different types of gases, and mixed loading is prohibited;

5. Stable storage position: the storage position of liquefied gas bottles should meet relevant standards, and the bottom should be stable and fixed;

6. Pay attention to safety when using: when using liquefied gas cylinders, you should abide by the operating rules and take corresponding protective measures.

Checkpoints are as follows:

1. Inspection of bottle bottom: the bottle bottom should be clean and free of oil and impurities, and check whether the bottle bottom is sunken or deformed. If there are large scratches, depressions or cracks on the bottom of the bottle, it should be replaced immediately;

2. Inspection of bottle body: The bottle body should have no obvious oxidation corrosion, damage and scratches. If the bottle body is found to have obvious oxidation corrosion and damage, it should be replaced in time;

3. Bottle mouth inspection: The bottle mouth should be intact, with a protective cap and well sealed. If it is found that the bottle mouth is not tightly sealed, the gasket should be replaced in time.

To sum up, the use of liquefied gas cylinders needs to follow certain specifications, including clear identification, intact, prohibition of mixed loading, stable storage location, attention to safety and so on. Attention should also be paid to environmental requirements, checkpoints, precautions, operating procedures and disposal to ensure the safe use and management of liquefied gas cylinders.

Legal basis:

Article 13 of the Measures for the Safety Management of Liquefied Gases

Users of liquefied gas cylinders shall carry out maintenance and repair in accordance with regulations, and shall not dismantle or change their structures without authorization; Ensure that the storage and use places of liquefied gas cylinders are well ventilated and prevent the fire source from being far away from liquefied gas cylinders.