Nissan Yida throttle matching method

1. First put out the flame, turn the ignition switch to the on position, as shown in the figure below, and then proceed to the next step.

2. Secondly, after completing the above steps, wait for 3 seconds, then quickly and completely press and release the accelerator pedal for 5 times within 5 seconds, wait for 7 seconds without moving anything, then completely press the accelerator pedal, as shown in the figure below, and then proceed to the next step.

3. Finally, after completing the above steps, pedal and keep still.

? Observe the engine fault light on the instrument. It will start flashing after about 10 seconds, and then it will remain on. Release the accelerator pedal, and the matching is over, as shown in the following figure. In this way, the problem is solved.